Horizontal Project step 1

10" long x 8" wide 2.25" high flat pot

A brick of flora foam that fits into the center of the flat pot

1 step:

Fit 2 stem of carnation into the both end of the flora foam

stick the carnation stem about 3" into the foam

Piece a stem of carnation into the center. Be sure to keep the over all (including pot) height under 12".

Piece two more stem of canation at the 45 degree to the center and the long side carnation. It now should formed a line of 5 carnations.

Add two carnations on the short side of the foam.

Here is the top view picture from the last step.

Piece two more stem of canation at the 45 degree to the short side carnation. It now should formed a line of 5 carnations on the short side.

Add a carnation on each of the top corners of the foam brick. Now, you should have used up all 15 carnations. Cross check with the diagram below for the correct position.

Side view of the carnation. This will be actual structure of your horizontal plant.

A view from the long side.

Add the 8 pieces of Statice. Start with putting the longest 4 statice on the long side of the block (2 per side)

4 shorter statice on the short side (2 per side).

You should now have used up all 8 statice. Cross check with the top view diagram below. Noted the red lettering is for the statice position.

<<PREVIOUS PAGE

NEXT PAGE>>

Email: bob@gladnews.com

Contact Webmaster

ICQ#92253640

	10" long x 8" wide 2.25" high flat pot
	A brick of flora foam that fits into the center of the flat pot
	1 step: Fit 2 stem of carnation into the both end of the flora foam
	stick the carnation stem about 3" into the foam
	Piece a stem of carnation into the center. Be sure to keep the over all (including pot) height under 12".
	Piece two more stem of canation at the 45 degree to the center and the long side carnation. It now should formed a line of 5 carnations.
	Add two carnations on the short side of the foam.
	Here is the top view picture from the last step.
	Piece two more stem of canation at the 45 degree to the short side carnation. It now should formed a line of 5 carnations on the short side.
	Add a carnation on each of the top corners of the foam brick. Now, you should have used up all 15 carnations. Cross check with the diagram below for the correct position.

	Side view of the carnation. This will be actual structure of your horizontal plant.
	A view from the long side.
	Add the 8 pieces of Statice. Start with putting the longest 4 statice on the long side of the block (2 per side) 4 shorter statice on the short side (2 per side).
	You should now have used up all 8 statice. Cross check with the top view diagram below. Noted the red lettering is for the statice position.